Corn-Sunflower Header Pack

With SunStar plates, you move quickly through standing sunflowers. Take advantage of your corn header's ability to pick up and salvage lodged heads, something most header conversions won't do. An inexpensive SunStar attachment bolts on to your corn head. There are no moving parts to wear and replace.

Corn-Sunflower Header Pack

NOTE: Helianthus headers have been modded to harvest both sunflowers, and corn!All headers are colorable, prices are lowered, and operating speed is slightly higher. You will need to unpack the main zip file, and extract each remaining zip files into your mods folder.

Jay-Mar, Inc. is your total agri-supplier providing farmers with liquid and dry fertilizers, farm seed, crop protection products and custom application, soil and tissue testing services, packaging, sprayer and fertilizer equipment parts and storage tanks.

Winter Coat builds a larger, healthier root system in your lawn. A stronger root system makes your lawn better equipped to fight disease and weed pressure. Grass roots develop in the fall and spring. Your lawn will tolerate drought, heat and other stresses better and stay green longer. The micronutrient package in Winter Coat acts like a multi-vitamin for the lawn. Applying Winter Coat this fall will get your lawn green and growing faster next spring.

Fixed knife for sunflower kit of Oros (4242, 6211, 6211+HSA, 6236, 6237, 6244, 6254, 8252, 8254, 8257) corn headers. Dimention in MM: Length - 70 Width - 48 Number of mounting holes - 2 . References: #1.327.619, 1327619. Aftermarket spare parts.

Fixed and seperated header functionality to allow for hired workers. There are now two seperate headers. the multifruit header is capable of cutting Wheat,Barley,Oat,Sorgum,Soybean,Corn,Sunflower and cotton.

I had to seperate the two due to sugarcane requiring a fruit preparer which was causing issues with workers for all the other crops. More updates to come! I hope to add a sugarcane decal to the sugarcane header and allow for colorable options! For now until I can figure all of that out I colored the sugarcane header a light gray to tell the difference.

CaseIH 4408, 4416 and 4416 corn headers with 22 and 30 inch spacing. Changelog 1.1.0.0 Added New Holland 980CR Rigid 8 row 30in Added New Holland 980CR Rigid 16 row 30in Added New Holland 980CR Rigid 18 row 22in New Sto...

The unique movement of the FD2 reel picks up and gently places crops onto the drapers. Our cam design allows the reel fingers to get underneath lodged crop and pick it up before cutting. Aluminum reel ends and sectors help reduce overall weight and improve efficiency. The FD2 header and reel are highly adjustable from the cab for optimal performance. Header tilt control adjusting the draper and knife angle, and fore-aft reel positioning lets you set the FD2 for the most challenging real-world harvesting conditions.

The MacDon FD2 FlexDraper is a multi-crop harvesting machine. Switch the FD2 easily from a flex to a rigid frame header with the simple flip of a lever, giving you the versatility to move from one crop type to another. Cereals, oilseeds, beans, just about any crop in any condition; another reason why the FD2 is the ultimate performance upgrade for your combine.

The FD2 FlexDraper fits all major brand combines* with a dealer-installed completion package and integrates seamlessly with your combine for the best possible user experience. This multi-brand compatibility and interchangeability mean your investment will hold its value when you decide to update.

New for the FD2 is a triple reel option. Three reel sections now mirror the flexing points of the header, delivering an even closer reel-to-cutterbar relationship for smooth, consistent, heads-first feeding. Triple reels are optional on 40 foot and standard on 45 and 50 foot FD2 models+.

A performance option worth considering for anyone harvesting big bushy, high-volume crops, like canola (rapeseed), peas, and mustard, is the Upper Cross Auger. The auger keeps bushy crops on the draper as they move to the center of the header, where twin pitch flighting actively and aggressively drives the crop down onto the feed auger. This option runs the full length of the header and is available on all sizes of the FD2 FlexDraper.

The Set-It-Right Multi-Tool is all you need to get the FD2 dialed in for harvesting success. Conveniently stored onboard the header, this one tool gets the FD2 ready for your unique harvesting conditions.

From a glance, the most noticeable design cue on the FD2 is the addition of aluminum components. Aluminum features include reel endshields, reel sectors, and backsheets. But these components aren't just for looking good; they help reduce the overall weight of the header, improving efficiency without compromising strength.

ContourMax Contour Wheels allow the header to follow the field's contours, leaving a consistent stubble height while cutting up to 18 inches off-the-ground. This incredible performance option uses the FD2's Flex-Float Technology along with the combine's auto header height control to its full advantage, conveniently adjusting in-cab and on-the-go for 1 to 18 inches of off-the-ground, ground following harvesting performance+.

The FD2 gets instant float response with MacDon's Active Float System. Integrated but independent of the combine's auto header height control, this simple mechanical system supports up to 97% of the header's weight, allowing the FD2 to effortlessly float over ground fluctuations. This instant float response lets the FD2 cut extremely close to the ground without pushing dirt, keeping the FD2 flush with the ground delivering a clean, close, even cut every time.

With the FD2, you get up to 70% more flex from the one and only FlexDraper*. The FD2 is a floating three-section flexible header with single, double, and triple reel configurations. This allows the entire header frame, cutterbar, and reel to follow ground contours as a unit, flexing up to 17 inches+ on either end while maintaining a close reel-to-cutterbar relationship. This unique flexing action allows the FD2 to follow the ground and deliver smooth, consistent, heads-first feeding to the combine, even at extreme flex.

On the FD2, MacDon's low-profile cutterbar improves on an already good thing; the knife's distance to the draper is shorter, meaning less chance of seed loss at the cutterbar. In-cab header tilt control adjusts the knife angle to match any harvest condition, and the ultra-smooth ground-facing surface of the cutterbar helps it glide along the ground for a smooth close shave every time.

With the FD2, you get up to 70% more flex from the one and only FlexDraper*. The FD2 is a floating three-section flexible header with double and triple reel configurations; this allows the entire header frame, cutterbar, and reel to follow ground contours as a unit, flexing up to 17 inches+ on either end while maintaining a close reel-to-cutterbar relationship. This unique flexing action allows the FD2 to follow the ground and deliver smooth, consistent, heads-first feeding to the combine, even at extreme flex.

The unique movement of the FD2 reel picks up and gently places crop onto the drapers. Our cam design allows the reel fingers to get underneath lodged crop and pick it up before cutting. Aluminum reel ends and sectors help reduce overall weight and improve efficiency. The FD2 header and reel are highly adjustable from the cab for optimal performance. Header tilt control adjusting the draper and knife angle, and fore-aft reel positioning lets you set the FD2 for the most challenging real-world harvesting conditions.

The FD2 FlexDraper fits all major brand combines* with a dealer-installed completion package and integrates seamlessly with your combine for the best possible user experience. This multi-brand compatibility and interchangeability means your investment will hold its value when you decide to update. 041b061a72